Outgoing alert message
There is a default outgoing alert message recorded on the telephone.
You can replace this message with one of your own. After activating an
automatic emergency call, the phone numbers assigned to buttons M1,
M2 and M3 are called automatically. The alert message is played
repeatedly until your emergency call is acknowledged by the person
receiving it through pressing the "0" key. For this reason, you must end
your own alert message clearly telling the receiving party to "...take this
emergency call by pressing the 0 key!".
Note: When recording your message, make sure that the person
called recognises your name in the emergency call. Inform them
clearly that this is an emergency call and that you need help.
Recording an outgoing alert message
• Press
.
• Select RECORD MESSAGE using
• Press and hold down
• Release
Playing the outgoing alert message
• Press
.
• Select CHECK MESSAGE using
Deleting the outgoing alert message
• Press
.
• Select CHECK MESSAGE using
• Press
during playback. The message will be deleted.
when you speak your message.
to end recording.
/
/
/
42
and press
and press
and press
.
.
.
Need help?
Do you have a question about the Easywave and is the answer not in the manual?
Questions and answers