Deleting recordings
• Press
.
• Select NAME RECORDING using
.
• Then select an entry using
• Press
during playback to delete the recording.
Deleting a single entry from the phone book
• Press
and select an entry using
• Press
. The display shows DELETE?.
• Press and hold
• To abort the deleting procedure press
Delete all entries from the phone book
• Press
and select an entry using
• Press and hold
ALL?.
• Press and hold
• To abort the deleting procedure press
Calls list
Note: The caller number display function, essential for the calls list,
is a supplementary service offered by telephone network providers.
Contact your network provider for further information.
If this function is available with your telephone line, the number of the
caller and the name, if an entry in the telephone book exists, appears in
the display or is spoken when the phone rings.
If the caller has suppressed transmission of his phone number or it is
otherwise unavailable, a corresponding message appears in the display.
The phone number is not displayed and, as a result, is not stored in the
calls list.
The idle display shows, how many entries are in the calls list and how
many of them are NEW (not yet seen). A total of 64 call numbers can be
stored in the calls list. The flashing red LED indicates new calls in the
calls list. This LED will flash as long as there are still new (not read)
calls in the calls list.
and
for approx. 4 s. Entry is deleted.
for approx. 4 s. The display shows DELETE
for approx. 4 s. again.
40
and
and press
.
and
.
.
and
.
.
Need help?
Do you have a question about the Easywave and is the answer not in the manual?
Questions and answers