Little Giant PLATFORM PRO 10170 Instructions

DO NOT EXCEED THE DUTY RATING OF THE LADDER. NEVER EXCEED 300 lb MAX CAPACITY.
The PLATFORM PRO is compatible with all Little Giant articulated extendable models.
The PLATFORM PRO is compatible with all LITTLE GIANT®
articulated extendable models. It may be used as either a
tool tray or a standing platform, and enables you to do a
variety of jobs with many features, including:
• Various round holes for screwdrivers, hammers, drills, etc.
• Slotted holes for putty knives, drywall saws, etc.
• Dished area for nails, screws, nuts, bolts, etc.
• Paint tray locks*
• Adjustable arms that allow it to be set up on either the
outside or inside of the ladder.
* Works with most metal paint trays
1. Inspect upon receipt and before each use. Never use if
damaged, bent or broken.
2. Make sure nuts and bolts are tight before using.
3. Do not use the platform on articulated extendable ladders
in 90-degree ladder mode.
4. Make sure the platform is level and fully hooked on rungs
before using.
5. Never stand on platform while it's being used as a tool tray.
6. Never adjust the platform while it's in use.
7. Never stand on platform if standing surface becomes slick from
water, ice, snow, or other substances.
8. Heed other warnings and instructions found on the ladder and
in operation and safety instructions.
RAPID LOCK® fastener operation
1. Unlock the RAPID LOCK® fasteners
by rotating 90-degrees until locking
pin rests outside of the hole.
2. Adjust to the desired length.
3. Lock by rotating 90-degrees until
locking pin is fully seated in desired
position.
4. Make sure both locks are fully
engaged before use.
PLATFORM PRO
INSTRUCTIONS
WARNING
™
Adjustable arms
with RAPID LOCK®
Fasteners
Paint tray locks
Use positions:
On Inside
of Ladder
Locked
Unlocked
™
!
On Outside
of Ladder
84007 v0 12.21 (1)