Download Print this page
Little Giant Safety Step User Instructions

Little Giant Safety Step User Instructions

Hide thumbs Also See for Safety Step:

Advertisement

Quick Links

PROPER CARE AND STORAGE
• Store in a safe and dry place out of the weather.
• Keep clean and free of all foreign material.
• Examine all working parts for any damaged, worn, or missing parts.
• Keep steps dry and clean.
Watch for electrical wires. This Safety Step conducts electricity. Never
allow yourself or the Safety Step to come in contact with live circuits.
INSPECTION
• Inspect upon receipt and before each use. Never climb a damaged, bent, or broken Safety
Step; all parts must be in good working order.
• Make sure all rivets are tight and function properly.
• Keep your Safety Step clean and free from wet paint, mud, snow, grease, oil, and other
slippery materials. Keep your shoes clean.
• Replace damaged, worn, or missing rubber feet and step tread as required to ensure
safety.
• Never make temporary repairs of damaged or missing Safety Step parts.
READ ALL WARNING AND SAFETY LABELS
• Do not over-reach. Keep your body centered between both side rails. Do not lean sideways.
Move Safety Step as needed.
• Face your Safety Step when climbing up or down.
• Open Safety Step fully before climbing.
• Wear slip-resistant shoes.
• Place your Safety Step on firm, level surface.
• The Safety Step is designed for one person use including materials or tools. Not to exceed 300
lbs.
• To protect children, do not leave Safety Step set up and unattended.
• Do not use the Safety Step if you tire easily or are subject to fainting spells, are using medi-
cine, alcohol or drugs, or are physically handicapped.
• Do not use on ice, snow, or slippery surfaces without non-skid devices.
• Do not place your Safety Step on unstable surface or on scaffolding to gain additional height.
• Do not place in front of door opening that would swing toward Safety Step.
• Fully lock the handrail in the base hinge when the handrail is in the upright position. Keep your
hands and fingers away from the hinge joint when locking.
• Manufacturer disclaims any liability or responsibility for damage or injury caused as a result of
misuse of the Safety Step.
• If a leg or step is broken, if it doesn't function properly, or is exposed to fire or chemical
corrosion, destroy the Safety Step.
• Read, understand, and comply with all supplied instructions before using this Safety Step.
300 lbs WORKING LOAD
MODEL #
DISCRIPTION
10210B
2 Step with Bar
10310B
3 Step with Bar & Tray
10410B
4 Step with Bar & Tray
ONE YEAR WARRANTY
Little Giant Ladder Systems
1198 N. Spring Creek Place, Springville, UT 84663 / Phone: 800-453-1192
www.littlegiantladders.com
©2011 Little Giant Ladder Systems 56428 v2 9.11
USER INSTRUCTIONS
TOP STEP
STORAGE
HEIGHT
HEIGHT
18" / 45 cm
31.5" / 80 cm
26.5" / 67 cm
43" / 109 cm
35" / 89 cm
55" / 139.5 cm
STORAGE
WEIGHT
WIDTH
14.5 lbs / 6.6 kg
5" / 13 cm
21 lbs / 9.5 kg
5" / 13 cm
26.5 lbs / 12.1 kg
5" / 13 cm
TO OPEN
OPEN THE SAFETY STEP
BY TILTING THE TOP STEP.
WARNING: Handrail
must be down to open
the Safety Step.
TO CLOSE
CLOSE THE SAFETY STEP
BY TILTING THE TOP STEP.
WARNING: Handrail
must be closed before
the Safety Step can be
placed in the storage
position. Failure to do
so may result in
damage.

Advertisement

loading
Need help?

Need help?

Do you have a question about the Safety Step and is the answer not in the manual?

Questions and answers

Summary of Contents for Little Giant Safety Step

  • Page 1 • To protect children, do not leave Safety Step set up and unattended. • Do not use the Safety Step if you tire easily or are subject to fainting spells, are using medi- cine, alcohol or drugs, or are physically handicapped.
  • Page 2 LITTLE GIANT SAFETY STEP WARRANTY Wing Enterprises, Inc., warrants each new ladder, to the original purchaser thereof, to be free from defects in workmanship and materials when operated under normal conditions and maintained properly. This warranty covers all parts of the ladder, including hinges and lock assemblies.

This manual is also suitable for:

10210b10310b10410b