Little Giant Rock Lock Assembly Replacement
  1. Manuals
  2. Brands
  3. Little Giant Manuals
  4. Ladders
  5. Rock Lock
  6. Assembly replacement

Little Giant Rock Lock Assembly Replacement

Hide thumbs
1
2

Advertisement

Table of Contents

ROCK LOCK OUTER ASSEMBLY REPLACEMENT

READ THESE INSTRUCTIONS COMPLETELY BEFORE YOU START. IF YOU DON'T
UNDERSTAND THESE INSTRUCTIONS, PLEASE CALL 800-453-1192 FOR ASSISTANCE
Procedure for replacing the outer assembly on Little Giant Ladder Systems Rock Lock
participating ladders.
1. Failure to comply with all instructions may result in serious injury.
2. Make sure this kit is compatible with your ladder. If you have any questions concerning
the use of this kit on Little Giant Ladder Systems products, call 800-453-1192 for
assistance.
3. Before installing this kit, identify all kit components. If any components are missing or
damaged, please contact Customer Care. Do not substitute any components.
4. Inspect the ladder before installing this kit. Repair or replace any damaged or missing
ladder parts before using the ladder. Use only Little Giant Ladder Systems repair or
replacement parts. If you are unable to repair it, discard the ladder.
NOTE: IF ANY OTHER PART OF THE LADDER IS DAMAGED BEFORE OR DURING
THE PROCESS OF INSTALLING AND/OR REPAIRING, DISCARD THE LADDER OR
CONTACT CUSTOMER CARE FOR INSTRUCTIONS.
Little Giant Ladder Systems • 1198 North Spring Creek Place • Springville, UT 84663 • USA

COMPONENTS IN KIT

DO NOT USE A DAMAGED LADDER!
Customer Service:
Monday-Friday 8AM-5PM MST
800-453-1192
80398 v2 12.15 (1)

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Rock Lock and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Little Giant Rock Lock

Summary of Contents for Little Giant Rock Lock

  • Page 1 THE PROCESS OF INSTALLING AND/OR REPAIRING, DISCARD THE LADDER OR CONTACT CUSTOMER CARE FOR INSTRUCTIONS. DO NOT USE A DAMAGED LADDER! Customer Service: 800-453-1192 Monday-Friday 8AM-5PM MST Little Giant Ladder Systems • 1198 North Spring Creek Place • Springville, UT 84663 • USA 80398 v2 12.15 (1)
  • Page 2 1. Push down to dis-engage Rock Locks. 2. When pushed down, the Rock Lock tabs will release the outer assembly from the inner assembly. 3. Remove the old outer assembly, and discard. 4. Replace with new outer assembly. 5. Re-engage Rock Lock tabs to lock the outer assem- bly to the inner assembly 80398 v2 12.15 (2)

Table of Contents