LG WT-S11WH Owner's Manual page 25

浸泡 (Soak)
• This option can be selected to wash heavily
soiled clothes by soaking in water for some
time to remove dirt and grime.
Press the 電源開/關 (POWER/Auto Off)
1
button.
2
Select a washing programme.
Press the Turbo Wash™ button to set time
3
required.
Press each of the 過水 (Rinse) or 脫水 (Spin)
4
button to select the number of Rinses or the
Spin strength.
Press the 啓動/暫停 (START/PAUSE) button.
5
預約完成 (Time Delay)
• You can set a time delay so that the washing
machine will start automatically and finish after
a specified time interval.
Press the 電源開/關 (POWER/Auto Off)
1
button.
2
Select a washing programme.
Press the 預約完成 (Time Delay) button to
3
set the required delay ending time.
Press the 啓動/暫停 (START/PAUSE) button.
4
NOTE
• This function is the time to the end of the
programme, not the start. The actual running
time may vary due to water temperature, wash
load and other factors.
• Reservation can be made up to 18 hours by
1-hour interval up to 3 - 12 hours and 2-hour
interval for 12 - 18 hours. This function cannot
be set for less than 3 hours.
• To cancel this function, press
預約完成 (Time Delay) button repeatedly
until the reservation is canceled or press the
電源開/關 (POWER/Auto Off) button to turn
off and on power.
熱水 (Hot Wash) / 冷水 (Cold Wash)
• Press the 熱水 (Hot Wash) and
冷水 (Cold Wash) buttons to select hot water,
cold water, or hot and cold water (warm water).
• It can be changed during operation.
• If 熱水 (Hot Wash) is selected, washing will be
done with hot water and rinse will be done with
cold water.
• Hot and cold water makes appropriate
temperature by mixing them adequately when
both hot water and cold water are selected.
• Both 熱水 (Hot Wash) and 冷水 (Cold Wash)
are automatically selected under
滾筒清潔 (Tub Clean) programmes.
EN
25