Intermediate Position - GAPOSA Emitto Smart 16 Manual

INTERMEDIATE
POSITION
INTERMEDIATE POSITION SETUP
(Just for motors with electronic limit switch)
Stop the shutter/awning in the desired
1

intermediate position.

Press simultaneously the UP and DOWN
buttons until the motor makes a brief
2
movement in both directions.
The intermediate position has been setup.
RECALLING THE INTERMEDIATE POSITION
Keep the STOP button pressed at least for at
least 3 seconds.
ERASING THE INTERMEDIATE POSITION
Press simultaneously, both the UP and
DOWN buttons until the motor makes a brief
movement in both directions.
3"