Piega Ace Wireless Series Quick Start Guide

HOW TO GET STARTED
Simply follow the step-by-step instructions below to start using your Ace Wireless loudspeakers or refer to the comprehensive manual on our website if you require further information.

UNPACK YOUR LOUDSPEAKERS

Make sure that the following items are included in the scope of delivery:

SET UP AND CONNECT TO POWER

Start by positioning your speakers and connecting them to the power supply.

Option: WIRELESS-MODE

Select your preferred mode by flipping the WIRELESS-switch:

• choose «ON» to enable all wireless functions and keep Bluetooth and WiFi active
• choose «OFF» to disable certain wireless functions. Refer to the online manual for further details.

Please note that all WIRELESS-functions should be active during the installation process, so make sure to select «ON» on both speakers.

PAIR YOUR LOUDSPEAKERS

To couple your units, start by pushing the «PAIR» button on the Rx-Speaker. The indicator starts to flash.

Then push «PAIR» on the Tx-Speaker and wait for the indicator to flash.

The connection is now being established automatically. After approx. 20 seconds, the indicator stops blinking and remains lit when the units are connected.

CONFIGURE YOUR LOUDSPEAKERS

1. A music signal consists of two audio channels, a left and a right one. This is how to set them up:

To assign the channels use the «SELECT» button and choose from:

LEFT: for the loudspeaker on the left
MONO: for the use of only one single loudspeaker
RIGHT: for the loudspeaker on the right

2. For the best possible listening experience, choose the loudspeaker setting that best suits the speaker placement in your room:

NEUTRAL: This setting is recommended for speakers that are placed at least 50 cm from the wall.

WALL: This setting is recommended for speakers that are placed less than 50 cm from the wall. The bass is ever so slightly decreased in this case.

SUB: This setting is recommended when using a subwoofer in combination with your loudspeakers. In this case, bass tones below 50 Hz are being suppressed. If you generally prefer a tuning with little bass, this is your best choice.

STREAMING OPTIONS

If you are planning to integrate your speakers into your WiFi, we recommend downloading Google Home from the IOS or Android store. Please note the loudspeakers should have been operating for at least 1 minute to proceed with the following steps.

Now open the Google Home app.

Should the speakers not appear automatically, push «+» at the top left of your screen to add them in.

Then select "set up device" and follow the instructions in the Google Home app.

The ACE Wireless loudspeakers are now connected to your network and can be selected from various streaming services such as Spotify. For alternative streaming options refer to the detailed online manual.

HOW TO HOOK UP YOUR TV

By using an HDMI cable, you can connect your loud- speakers to the HDMI output (HDMI ARC or HDMI eARC) on your TV. Upon receiving a signal, your TV will automatically start playing audio output through the speaker set-up, to adjust the volume simply use your remote.

Make sure the HDMI output on your TV is active if you're having trouble establishing a connection. If there is no HDMI output on your TV, connect your devices using an analogue or optical digital input.

Refer to the detailed product manual to learn more about hooking up your TV and find out how to use your TV remote with your Ace speakers.

DO YOU NEED FURTHER INFORMATION TO SUCCESSFULLY COMPLETE THE INSTALLATION?

A comprehensive manual on every model, including additional instructions and FAQs, can be found on our website.

WARRANTY REGISTRATION

We don't want you to miss out on our warranty period of 6 years or 3 years on electronics, so don't forget to register your product on piega.ch/en/warranty-registration