Siemens iQ300 WM12N280HK User Manual And Installation Instructions page 50

en Troubleshooting
Fault
⁠
⁠ lights up.
⁠ flashes.
All other error codes.
The appliance is not
working.
The programme does
not start.
50
Cause and troubleshooting
The water pressure is low.
No remedial action possible.
The filters in the water inflow are blocked.
Clean the filters in the water inflow → Page 46.
▶
The tap is turned off.
Turn on the tap.
▶
The water inlet hose is kinked or jammed.
Ensure that the water inlet hose is not kinked or
▶
jammed.
The temperature is too high.
Wait until the temperature has dropped.
▶
→ "Cancelling the programme", Page 39
▶
Water level is too high.
Start the Drain
▶
Laundry is caught in the door.
Open the door again.
1.
Remove any trapped laundry.
2.
Close the door.
3.
Press ⁠ Start / Reload to start the programme.
4.
Door is not closed.
Close the door.
1.
Press ⁠ Start / Reload to start the programme.
2.
Malfunction
Call the after-sales service.
▶
→ "Customer Service", Page 59
The mains plug of the power cord is not plugged in.
Connect the appliance to the power supply.
▶
The circuit breaker is faulty.
Check the circuit breaker in the fuse box.
▶
There has been a power cut.
Check whether the lighting in your kitchen or other
▶
appliances are working.
You have not pressed
Press ⁠ Start / Reload.
▶
Door is not closed.
Close the door.
1.
Press ⁠ Start / Reload to start the programme.
2.
Childproof lock is activated.
programme.
⁠ Start / Reload.