Siemens iQ300 WM12N280HK User Manual And Installation Instructions page 47

Cleaning the filter on the tap
Note: Please read the information in
the Safety → Page 4 and Preventing
material damage → Page 10 sections
to ensure that you use the appliance
safely.
Requirement: The water inlet hose is
empty.
Remove the water inlet hose from
1.
the tap.
Clean the filter with a small brush.
2.
Cleaning and servicing en
Connect the water inlet hose and
3.
check for leaks.
Cleaning the filter on the
appliance
Note: Please read the information in
the Safety → Page 4 and Preventing
material damage → Page 10 sections
to ensure that you use the appliance
safely.
Requirement: The water inlet hose is
empty.
→ "Emptying the water inlet hose",
Page 46
Disconnect the hose from the rear
1.
of the appliance.
1
2
47