Siemens iQ300 WM12N280HK User Manual And Installation Instructions page 45

8.
CAUTION - Risk of scalding!
When you wash at high temperat-
ures, the detergent solution gets
hot.
Do not touch the hot detergent
▶
solution.
To allow the detergent solution to
flow out into the container, remove
the sealing cap.
Firmly press on the sealing cap.
9.
Insert the drain hose into the
10.
holder.
Cleaning and servicing en
Cleaning the drain pump
Note: Please read the information in
the Safety → Page 4 and Preventing
material damage → Page 10 sections
to ensure that you use the appliance
safely.
Requirement: The drain pump is
empty. → Page 44
Since water may remain in the
1.
drain pump, remove the pump cap
carefully.
Clean the interior, the thread on
2.
the pump cap and the pump hous-
ing.
Make sure that the impeller in the
3.
drain pump can be rotated.
Insert the pump cap and screw it
4.
on as far as it will go.
90°
The handle on the pump cap must
be in a vertical position.
45