Inspecting Burners - Bluegrass Living B30TD-BL Owner's Operation And Installation Manual

Vent-free gas wall fireplace

Hide thumbs

Table Of Contents

Table of Contents

IMPORTANT: Owner's should check pilot flame pattern and burner flame pattern often.

Incorrect flame patterns indicate the need for cleaning (see Care and Maintenance,

page 22) or service.

WARNING: Only a qualified service person should service and

repair heater. This includes maintenance requiring replacement or

alteration of components.

Figure 23 shows a correct pilot flame pattern.

Figure 24 shows an incorrect pilot flame pat-

tern. The incorrect pilot flame is not touching

the thermocouple. This will cause the ther-

mocouple to cool, which shuts the heater off.

If pilot flame pattern is incorrect, as shown

in Figure 24

• turn heater off (see To Turn Off Gas to Ap-

pliance, page 19)

• see Troubleshooting pages 23 through 26.

WARNING: If yellow tipping

occurs, your heater could pro-

duce increased levels of carbon

monoxide. If the burner flame

pattern shows yellow tipping,

follow instructions at bottom of

this page.

Figure 25 shows a correct burner flame pat-

tern. Figure 26 shows an incorrect burner

flame pattern. The incorrect burner flame

pattern shows yellow tipping of the flame. It

also shows the flame higher than 1/2 the heat

shield height.

If burner flame pattern is incorrect as shown

in Figure 26:

• turn heater off (see To Turn Off Gas to Ap-

pliance, page 19)

• see Troubleshooting pages 23 through 26.

200470-01A