Quick Start - Cobra ESD-9150 Operating Instructions Manual

Installation
Dash Dash Mounting
Mounting
Peel protective
1
paper off one side
Note
of hook and loop
It will be easy for you t o
material.
remove and reinstall your
Cobra ESD-9150 detector at
any time using this hook
and loop material on the
dashboard.
Remember: Without the
means to adjust the angle
of the detector (when
Peel top paper off.
3
mounted as above), be
sure you that your Cobra
ESD-9150 has a level,clear
view of the road before you
attach the hook and loop
material.
Plug power cord
5
into detector.
4
Turn On and Adjust Volume
Place on dash.
2
Place detector on
4
hook and loop pad.
Plug power cord
6
i nto cigare t te lighte r.
Rotate ON-OFF Volume Control to left (away
1
from you). Three beeps will be heard and all
LEDs will light up in sequence.
A compass LED will remain lit to indicate the
unit power is ON.

Quick Start

Turn On and
Adjust Volume
Note
Display Brightness, City/
Highway, Muting, VG-2
Audio Alert On/Off settings
and compass calibration
data are retained in
memory even when unit is
turned OFF or removed
from power source.
Note
The compass must be
calibrated before initial use.
For more detailed instru ct i o n s
on compass calibration,
see page 13.
5