Operation; Turning On - Cobra ESD-9150 Operating Instructions Manual

Quick Start
Set Muting Set Muting Mode
Mode
Auto Muting
Automatically reduces volume of alert in progress
after 4 seconds.
Note
The factory default mode
is Auto Muting. For more
detailed operation
instructions on setting
muting mode, see page 12.
Manual Muting
Press and release
1
volume of alert in progress.
To Switch Between Modes
Press and release
1
signal is being received, to switch from Manual
to Auto Mute.
8
MUTE button to reduce
MUTE Button when no
Turning On Your ESD-9150
Plug power cord Plug power cord i nto
2
into detector.
c i g a re t te lighte r.
Rotate ON-OFF Volume Control to the left
( away from yo u ) . Th ree power ON co n f i rm at i o n
beeps will be heard and all LEDs will light up
from left to right in sequence.
One of the compass LEDs will remain lit to
indicate the unit power is ON.

Operation

Turning
On Yo u r
E SD-9 1 5 0
Note
The compass must be
calibrated before initial use.
For more detailed instru ct i o n s
on compass calibration,
see page 13.
ON mode
9