Dim Button; Highway/City Mode - Cobra ESD-9150 Operating Instructions Manual

Operation

Dim Button

Dim Button
You may select from three levels of bri g htness fo r
your Co b ra ESD-9150 display: Bri g ht, Di m ,and Da rk .
Press and release
1
Note
LED display brightness to Dim.A single beep
Bright = "Beep-Beep"
confirms dim LED brightness.
Dim = "Beep"
Dark = "Beep"
Press and release
2
LED display off. A single beep confirms no LED
display. The compass LED(s) will stay on dim.
Press and release
3
return led display to Bright.A double beep
confirms normal LED brightness.
10
DIM button to reduce the
DIM button again to turn
DIM button a third time to

Highway/City Mode

The Highway/City function is controlled by a
2 - s tep butto n . In the City mode, false radar alerts
will be reduced.
To engage City Mode:
Press and release CITY button and the
1
LED on the front of the unit will illuminate.
A single beep confirms City mode.
To reactivate the Highway Mode:
Press and release CITY button again.
1
A double beep confirms Highway Mode.
Operation
Highway/City
Mode
Note
Use City Mode in or near
cities where there are many
sources of false radar signals
such as microwave relay
towers and automatic door
openers. This will filter out
weak signals.
CITY LED
will illuminate
while in CITY
Note
mode.
City ="Beep"
Highway ="Beep-Beep"
11