Quick Start - Cobra ESD-9220 WX Operating Instructions Manual

Installation
Dash Dash Mounting
Mounting
Peel protective paper off
1
one side of hook and
loop material.
Note
It will be easy for you to
remove and reinstall your
Cobra® ESD-9220 WX
detector at any time using
this hook and loop material
on the dashboard.
Peel top paper off.
3
Remember: Without the
means to adjust the angle
of the detector (when
mounted as above), be
sure you that your Cobra®
ESD-9220 WX has a level,
clear view of the road
Plug power cord into
before you attach the hook 5
detector.
and loop material.
7
4
Place on dash.
2
Place detector on hook
4
and loop pad.
Plug power cord into
6
cigarette lighter.
Place antenna in
upright position for
optimum reception of
weather stations.
Turn On and Adjust Volume
Rotate ON-OFF Volume Control to left (away
1
from you). In both Tone and Voice Modes, the
unit will announce "Testing" followed by three
beeps. All LEDs will light up from left to right
in sequence and announce "System Ready."

Quick Start

Turn On and
Adjust Volume
Note
Display Brightness, City/
Highway, Muting, VG-2
Audio Alert On/Off,
Weather Radio On/Off
(including last station
tuned), Wx Alert On/Off
settings are retained in
memory even when unit is
turned OFF or removed
from power source.
5