Cobra BDL 150 Quick Start Manual

Quick Start Guide

For Pairing With iOS Devices
NOTE: This device complies with part 15 of FCC rules: Operation is subject
to the following two conditions: (1) This device may not cause harmful
interference, and (2) This device must accept any interference received
including interference that may cause undesired operation.
CAUTION: Modifications or parts not approved by Cobra Electronics
Corporation may violate FCC Rules and void authority to operate this
equipment.
Use this instruction sheet for pairing with
iOS devices. If you have an Android
™
device, use the other quick start guide
included in this package.
Cobra iRadar uses Bluetooth wireless
®
technology to connect your iPhone /iPod touch
®
to display radar alerts and change settings.
Follow these simple steps to get your
Cobra iRadar up and running.
Cobra iRadar is made for:
iPhone 4S
iPhone 4
iPhone 3GS
iPod touch (4th Generation)
iPod touch (3rd Generation)
NOTE: *Location-based alerts and GPS
settings available only with iPhone.
Only radar/laser alerts and settings
will work with iPod touch.
Connecting with Cobra iRadar
Plug in your Cobra iRadar detector unit using
the included cigarette lighter adapter.
®
Turn unit on. A red LED will light. Make sure the
iOS/Android toggle switch is switched towards
the white circle. This will allow the unit to com-
municate with your iPhone or iPod Touch. When
switched toward the green circle, your iRadar
will only communicate with Android devices.
iOS/Android Mode
Toggle Switch
Power/Volume Wheel
On your iPhone/iPod
touch, enter
the Settings menu.
Press General, then
Bluetooth. Make sure
Bluetooth is switched
to ON.