Table of Contents
Advertisement
2. Alignment and Adjustment
2-1 Reference
1) X-Point (Tracking center) adjustment, "Head switching adjustment" and "NVRAM option setting" can be adjusted with remote control.
2) When replacing the Micom (IC601) and NVRAM (IC605 ; EEPROM) be sure to adjust the "Head switching adjustment" and
"NVRAM option setting".
3) When replacing the cylinder ass'y, be sure to adjust the "X-Point" and "Head switching adjustment".
4) Among Samsung VCR remote control used for adjustment as a accessory, only the remote control that has figures buttons (0 ~ 9) is
available for all adjustment regardless of chassis.
5) How to adjustment.
- Press the "TEST" button on Main PCB/F/AV PCB/Function PCB to set the adjustment mode.
- If the corresponding adjustment button is pressed, the adjustment is performed automatically.
- If the adjustment is completed, be sure to turn the power off.
2-1-1 Location of adjustment button of remote control
X-Point (Tracking Center) Adjustment
Head Switching Adjustment
Samsung Electronics
VCR STANDBY/ON
("5" Button)
("SPEED" Button)
Remote Control for adjustment is not supplied as a Service Jig.
TV STANDBY/ON
SLOW
SHUTTLE
V-LOCK
CLR/RST
F.ADV
INDEX
-/--
SELECT
TV
VCR
INPUT
REPEAT
AUDIO
DISP./
VOL
PROG/TRK
REC
MENU
OK
SPEED
DUB
TV/VCR
TIMER
Fig. 2-1
NVRAM Option Setting
("MENU" Button)
2-1
Advertisement
Table of Contents
