Advertisement
3.4 Setup Mode
Basic settings can be changed in the Setup menu. These include date &
time, language and sound options. Power the camcorder on and press the
MODE button. Use the ZOOM or LEFT and RIGHT buttons to select Setup.
Press the PHOTO or OK buttons to enter Setup Mode. A menu will display
on the screen.
3.4.1 Language
1. In Setup Mode use the ZOOM, UP or DOWN buttons to select
and press the PHOTO or OK buttons to enter the
2. Press the ZOOM, LEFT or RIGHT buttons to select your desired language.
Then press the PHOTO or OK buttons to confirm your selection.
3. Press the MENU button to exit the submenu.
4. You can also press the MENU button to exit the submenu without making a
selection.
3.4.2 Beep Sound
This function can turn the sound the camcorder makes after pressing a
button, on or off.
1. In Setup Mode use the ZOOM, UP or DOWN buttons to select Beep
and press the PHOTO or OK buttons to enter the Beep Sound
submenu.
2. Press the ZOOM, LEFT or RIGHT buttons to select your desired setting
(Off, On), Then press the PHOTO or OK buttons to confirm your selection.
3. Press the MENU button to exit the submenu.
4. You can also press the MENU button to exit the submenu without making
a selection.
3.4.3 Set Date and Time
This function allows you to set the current Date and Time on your recorded
video clips and captured photos.
1. In Setup Mode use the ZOOM, UP or DOWN buttons to select Set Date
and press the PHOTO or OK buttons to enter the Set Date submenu.
2. Press the ZOOM, UP or DOWN buttons to change the selected value.
3. Press the PHOTO or OK buttons to change the selected value. Note: the
selected value will not be highlighted, only press the PHOTO or OK buttons
once, then press the ZOOM, UP or DOWN buttons see which value is
selected.
4. Press the MENU button to exit the submenu after setting the date and time
or to exit the submenu without making any changes.
26
submenu.
Advertisement
