Advertisement
3.5 Wireless Connectivity
3.5.1 Connecting to the D Video App
To wirelessly operate the MN4K100Z camcorder you will need to install
the
can also scan the QR code below.
The camcorder can be operated remotely by following the steps below:
1. Turn the camcorder on and press the MODE button, then press the
ZOOM, RIGHT or LEFT buttons to select WIFI and press the PHOTO
or OK buttons to enter WIFI mode. The Network Name (SSID) and the
password will be displayed on the screen.
2. To close the wireless menu, press the PHOTO button.
3. The status LED will blink BLUE while searching for a WiFi connection.
4. Open your phone wireless menu, turn all wireless settings on and
connect to the network named MN4K100Z then join the network,
password is 12345678.
5. Once connected, the camcorder screen will show the mode in the top
left corner, the resolution next to it and a WiFi icon next to that.
6. The status LED will be a solid BLUE when connected.
on your Android or iOS device. To download the app,
29
Advertisement
