Table of Contents
Advertisement
Acknowledgement
We thank you for your purchase and hope that you are fully satisfied with this product.
Before you use this product, we recommend you read the instructions below carefully.
This manual explains how to use and install the product in accordance with its intended use.
Safety Warnings
WARNING: Do not disassemble the device
Any contact with the product's internal components can cause injury. In the event of a malfunction, only a qualified technician is
authorised to repair the device
WARNING: In the event of impact
If the product falls or undergoes heavy impact, immediately contact a qualified person to ensure the device is working correctly
WARNING: Unpacking the equipment
After unpacking the product, make sure that it is complete and in good condition. If you are not sure, immediately contact a person
with the required professional qualification
WARNING: Unpacking the equipment
Do not leave any part of the packaging within the reach of children or vulnerable adults
Accessories / Associated references
Designation
120Ω BUS CAN Termination
Crimp contacts and 21-point MCP connector
Equipment description
Bloc 11 is used to interface 6 momentary switches or contacts. Status information is available via a potential-free relay contact.
It interfaces with a Scheiber Multibloc network, in order to recover the state of the control switch and to deport the control to a
power block (Bloc 9 for example).
Reference
0D.CRD399
62.SAC12003A.00
P.2
L'innovation française depuis 1965
L'innovation française depuis 1965
Advertisement
Table of Contents
