Configuring A System For The First Time - R/Evolution 2000 Series Getting Started Manual

4
CH A P T E R

Configuring a System for the First Time

This chapter describes how to perform first-time configuration on the storage
system using RAIDar, which is the primary interface for configuring and managing
the system. It also describes how to perform basic storage configuration to verify
that your system is working.
This chapter includes the following topics:
"Setting Management Port IP Addresses Using the CLI" on page 36
■
"Configuring Your Web Browser for RAIDar" on page 40
■
"Logging in to RAIDar from a Local Management Host" on page 40
■
"Setting the Date and Time" on page 41
■
"Creating Virtual Disks" on page 42
■
"Mapping a Data Host to a Volume" on page 43
■
"Testing the Configuration" on page 44
■
"Logging Out of RAIDar" on page 44
■
"Next Steps" on page 44
■
For information about additional configuration and management tasks, including
changing the
guide.
user's password, see RAIDar's online help or the reference
manage
35