Connecting AC Power
Use this procedure to connect AC power to the enclosures.
1. Verify that both power switches are off.
2. Using the AC power cords, for each enclosure, connect one power and cooling
module to one power source in the rack, and the other power and cooling module to
a separate power source in the rack.
3. Connect the primary power cords from the rack to separate external power sources.
Power on the system as described in the following section.
Connecting DC Power
Except for connecting and disconnecting power cords, power supply installation and
removal instructions are the same for DC and AC power supplies.
24
R/Evolution 2530 Getting Started Guide • March 2009