Playing Jpeg Files; Connecting Auxiliary Components - RCA RTD3133H User Manual

Playing JPEG Files

JPEG fi les are image fi les. Make sure that they have
a resolution of less than 2 megapixels.
1. Press the OPEN/CLOSE button to open the disc
tray.
2. Place a disc that contains JPEG fi les and close
the disc tray.
A list of folders/fi les will appear on the screen.
Press or button to select your desired
fi le, and then press OK or PLAY button to start
playback.
Press the STOP button to display a folder list.
Magnifying image
Press ZOOM repeatedly to enlarge the image in 3
levels ( , and
2
1
3
• Press / / / buttons to view a diff erent part
of the image. You may move the image from the
center position to UP, DOWN, LEFT and RIGHT
direction. When you reach the edge of the
image, the display will not shift anymore in that
direction.
• Resuming normal playback
To turn ZOOM off , press the ZOOM repeatedly
until the is displayed.
Rotate an image
Press the ANGLE button repeatedly. The image will
rotate in the clockwise direction as follows:
No rotation (original)
Notes
• The time taken for the contents of the disc to
be displayed varies according to the size and
number of JPEG fi les on the disc. If nothing
is displayed after a few minutes, the fi le sizes
may be too large. Reduce the fi les' resolution
and write another disc.
• Before inserting a disc, make sure it is
compatible with the unit.
).
AUDIO IN/DIGITAL IN/AUX IN
TV, VCR or Set Top Box can be connected to AUX
IN/OPTICAL IN jacks at the back of the unit or
AUDIO IN at the front panel so that sound from the
auxiliary component comes into the unit and out
through the speakers.

Connecting auxiliary components

Refer to "Getting sound from external sources
such as TV" for details on connecting the auxiliary
components to the unit.
Selecting AUDIO IN / DIGITAL IN / AUX
IN mode
Press either SOURCE on the main unit or AUDIO IN
/ DIGITAL / AUX IN on the remote control to select
AUDIO IN, DIGITAL IN or AUX IN mode.
Sound output in AUX IN mode (or
AUDIO IN/DIGITAL IN mode)
• If you wish to change the Surround Sound
setting from 5.1 Channels to Stereo (not
recommended), please see Channels setting on
page 18.
• If the AUX IN (or AUDIO IN/DIGITAL IN) audio
signal is mono, you may not receive audio on all
speakers.
- 15 -