Playing Discs - Basic Functions - RCA RTD3133H User Manual

Overview of Controls
Changes video output signals
HDMI:
(Auto, 480p, 720p, 1080i or 1080p).
Using remote control to navigate through
the on-screen menus
Use / / / and OK on the remote control to
navigate through the on-screen displays (the DVD
player's menu, the Info Display that appears during
playback, or a disc's menu).
Use / / / on the remote to move through on-
screen menus in the direction of the arrow button
(e.g., to move right, press ). The arrow buttons
are used to highlight an option. Once highlighted,
press OK to select the option that is highlighted.
Note
Insert 2 "AAA" batteries in the remote
control prior to use.

Playing Discs - Basic Functions

Compatible discs
• DVD, DVD-R, DVD-RW, DVD+R, DVD+RW
• CD, CD-R, CD-RW
Compatible formats
• DVD, JPEG
• CD
Regional coding
Your unit has been designed to process regional
management information stored on DVD discs.
The regional code for your unit is 1. Discs that have
a diff erent regional code will not play.
Operating the DVD receiver
1. Turn on your television set.
2. Press ON•OFF on the remote control or ON/
STANDBY located on the front panel of the unit.
Press DVD on the remote control.
3. If you wish to switch from 5.1 Channels to Stereo
(NOT RECOMMENDED!), see instructions on page
18 under Channels setting section for changing
sound mode (Stereo or 5.1 Channels mode).
Loading disc
1. Press on the front panel of the unit to open
the disc tray.
2. Place a disc onto the disc tray with the label side
up.
3. Press again to close the disc tray.
Playback
Switch the unit and the TV set on.
1. After loading
automatically, or the disc menu appears. If the
disc menu appears, select the Play option to
begin playback.
2. Press STOP to stop playback.
Accelerated play
While the disc is playing, press REV or FWD one or
more times to vary the speed and direction of the
accelerated play. Press PLAY to resume normal
playback.
Pause
While the disc is playing, press PAUSE once for
freeze frame. Press PLAY to resume normal play-
back.
Frame advance
1. Press PAUSE twice. "Step" is displayed.
2. Each time you press PAUSE button, the picture
advances one frame.
3. Press PLAY to resume normal playback.
- 11 -
a disc, playback starts