eXact PipeCut Infinity Operating Instructions Manual page 3

Exact PipeCut Infinity
Data of Exact PipeCut saw blades
1. Exact TCT saw blades are for cutting steel,
copper, aluminum and all kind of plastics pipe
materials. Exact TCT saw blades can be
sharpened.
2. Exact CERMET saw blades are for cutting
stainless steel, acid proof materials, steel,
copper, aluminum and all kind of plastic pipe
materials. Exact CERMET saw blades can be
sharpened.
3. Exact CERMET ALU saw blades are for cutting
all kind of aluminum and plastic pipe materials.
Exact CERMET ALU saw blades can be
sharpened.
4. Exact TCT P blades are for cutting all kind of
plastic pipe materials. Exact TCT P saw blades
can be sharpened.
5. Exact DIAMOND X discs are for cutting Cast or
Ductile Iron only. Exact DIAMOND X discs
cannot be sharpened.
Declaration of Conformity
We declare under our sole responsibility that the pipe cutting machines Exact PipeCut Infinity
Described under" Technical Data" are in conformity with the following standards or standardization
documents:
EN 62841-1:2015, EN 55014-1:2017, EN 55014-2:2015, EN 61000-3-2:2018,
EN 61000-3-3:2002
according to the technical provisions of the directives 2006/42/EC and 2014/30/EU
For more information, please contact Exact Tools at the address below.
The technical file is available at the address underneath
The person authorized to compile the technical file:
Marko Törrönen, R&D Manager, Exact Tools Oy (marko.torronen@exacttools.com)
Helsinki, 08.02.2022
Seppo Makkonen
Chairman of the Board
Exact Tools Oy
Särkiniementie 5 B 64
FI-00210 Helsinki
Finland
2
English