Section 3 – Specifications
AT72
Table top
Turntable support
Drivetrain
Capacity
Frame Construction
Tabletop Height
Page | 4
72" Diameter x 7 Ga. reinforced top. Plain steel top
surface (no finish), powder coat on underside.
Adjustable part diverter included
Low-friction turntable support bearings
Heavy duty DC variable speed drive, 0.5-3 RPM
complete with 9 foot 120 VAC power cord
500 lb. part handling capacity
Mild steel 4 post design with powder coat finish
and brake casters for portability
Adjustable via hand operated hydraulic jack for
10" of vertical height adjustment 33" to 43" top of
table