Table of Contents
Advertisement
Section 6 – Operation
Applying Power
Section 6 – Operation
Power On and Speed Adjustment
Page | 7
Uncoil the provided 9ft cord and plug into a
grounded 15 Amp outlet.
NOTE: Make sure the On/Off toggle switch on the
controller is in the off position prior to applying
power.
To power up the Model AT Rotary Accumulation
Table place the POWER switch in the ON position.
The turntable speed may be adjusted by rotating
the SPEED CONTROL KNOB. Rotate clockwise to
increase speed and counterclockwise to reduce
speed.
Advertisement
Table of Contents
