Table of Contents
Advertisement
Troubleshooting
Symptoms
Turntable fails to Rotate
Lift Fails to Raise
Turntable Drive is Turning
but top is Stationary
Section 9 – Contact Information
Michael Lucey
Business Unit Manager
Phone: (607) 936-1341
mlucey@autocells.com
Email:
Al Herzog
Service Manager
Phone: (607) 936-1341
aherzog@autocells.com
Email:
Jim Morris
President
Phone: (607) 936-1341
Page | 15
Corrective Action
Plug power cord into an available 120VAC
outlet.
Turn power switch to ON position.
Rotate speed control knob clockwise to
increase speed.
Verify the 120VAC outlet is operating
property.
Check/ replace controller fuse
Verify height adjustment locks loosened.
Verify lift lowering valve is tight.
Verify lift has oil in it.
Verify setscrew in table top hub is tightly
secured.
Verify setscrew has not sheared. Replace
setscrew if required.
Verify setscrew is lined up with shaft keyway.
.
Advertisement
Table of Contents
