TP-Link ER7212PC V1 Installation Manual

Installation Guide
Omada Gigabit VPN Router
with PoE+ Ports and Controller Ability
Note: The image may differ from the actual product.
Hardware Overview Hardware Overview
2 1
Front Panel
Speed LED
LED SFP Slot 1 Gbps RJ45 Port
Back Panel
Grounding Terminal
Kensington RESET
Security Slot
Kensington Security Slot: Secure the lock (not provided) into the security slot
to prevent the device from being stolen.
RESET: Press and hold the button for 5 seconds, the SYS LED will flash quickly,
indicating the device is being reset to its factory default settings.
Grounding Terminal: The router comes with lightning protection mechanism.
Power Socket: Connect to the power outlet via the provided power adapter.
Hardware Connection
1 3
Connect via Ethernet
Connect via fiber network
Fiber-Optic Cable
PoE LED
Power Socket
Modem
Connect to RJ45 WAN Port
Connect to SFP WAN Slot
Optical Module
Package Contents
1
Router
Rubber Feet
LED Indication
On: Power is on.
PWR
Off: Power is off.
Flashing: System is running normally.
SYS
On/Off: System is running abnormally.
On: The device is bound to a TP-Link ID.
Slow Flashing: The device is connected to cloud but not bound to a TP-Link ID.
CLOUD
Quick Flashing: The device is being reset to its factory default settings.
Off: The device is disconnected from cloud.
On: The remaining PoE power is ≤ 7 W.
PoE Max
Flashing: The remaining PoE power keeps ≤ 7 W after this LED is on for 2 minutes.
Off: The remaining PoE power is > 7 W.
Green On: Connecting to a device but no activity.
Link/Act
Off: No device connected to the corresponding port.
(SFP WAN/LAN)
Flashing: Transmitting or receiving data.
Green On: Running at 1000 Mbps, but no activity.
Green Flashing: Running at 1000 Mbps and transmitting or receiving data.
Link/Act
Amber On: Running at 100/10 Mbps, but no activity.
(Port 3-4)
Amber Flashing: Running at 100/10 Mbps and transmitting or receiving data.
Off: No device is linked to the corresponding port.
Green On: Running at 1000 Mbps, but no activity.
Green Flashing: Running at 1000 Mbps and transmitting or receiving data.
Speed
Amber On: Running at 100/10 Mbps, but no activity.
(Port 5-12)
Amber Flashing: Running at 100/10 Mbps and transmitting or receiving data.
Off: No device is linked to the corresponding port.
Green On: The port is supplying power normally.
PoE
Green Flashing: Overload or short circuit is detected.
(Port 5-12)
Off: Not providing PoE power on the port.
Power Adapter
Installation Guide