Table of Contents
Advertisement
Chapter
Backup
To backup the Switch configuration via TFTP,
enter the TFTP server address.
•
TFTP Server
Specifies the TFTP Server IP Address to
which the Configuration file will be saved.
Destination
File
Specifies
•
configuration file. The default is StartupCfg.cfg
Admin > Firmware Upgrade
Admin > Firmware Upgrade
Via HTTP
Allows you to upgrade the firmware or save the current
firmware using your Web browser.
Upgrade
Select this option to load a firmware file from a
specified location. To load the file, perform the following
steps:
1.
In the File to upgrade field, type in the path and name
of the file or click the Browse button to locate the file.
Click the Proceed button.
2.
Click the OK button.
3.
Wait until the Continue button becomes available and
4.
click Continue to complete the process.
Backup
This option saves a copy of the currently used
firmware to a specified location. To save the firmware file,
perform the following steps:
1.
Click the Proceed button.
2.
Click the Save button.
3.
Select a location to save the file to and click Save.
4.
Click the Close button.
Via TFTP
Defines the upgrade through a TFTP Server.
Upgrade
Defines the screen functionality as a Firmware
upgrade.
24-Port 10/100 + 2-Port 10/100/1000 Gigabit Advanced Smart Switch with 2 Combo SFPs
the
name
of
the
Advanced Configuration
Backup
Defines the screen functionality as a Firmware
backup.
TFTP Server
Specifies the TFTP Server IP Address from
which files are downloaded
Source File
Specifies the file to be downloaded
Destination File
Specifies the destination file to which
the file is downloaded.
Admin > Reboot
Allows you to reboot the Switch or reset the Switch to the
factory default settings.
Admin > Reboot
Restart Switch
Select this option to reboot the Switch.
Reset Factory Defaults (except IP address)
option to reset the Switch to the factory default settings,
with the exception of the IP address.
Reset Factory Defaults
Select this option to reset the
Switch to the factory default settings, including the IP
address.
Admin > Ping
You can use a ping to see if another site on the network
can be reached. Ping sends ICMP echo request packets to
another node on the network.
Admin > Ping
Select this
Hide quick links:
Advertisement
Table of Contents
