Table of Contents
Advertisement
© 2020 VIVOTEK INC. All Right Reserved
Pragma: no-cache\r\n
\r\n
supportdevice=washer,heater\r\n
washer_status=off\r\n
PARAMETER
channel
supportdevice
washer_supportmode N/A
washer_mode
washer_status
washer_dwelltime
heater_supportstatus N/A
heater_status
VALUE
0~"capability_nvideoin"-1 Channel of the video source.
N/A
N/A
N/A
N/A
N/A
DESCRIPTION
Get support peripheral device.
Get the support mode of washer control system.
Get the current mode of washer control system.
It return the value of "washer_mode"
Get the current status of washer control module.
The status is 'off' as default, which means the
washer is stopped; and the status 'on' means the
washer is running.
Get the current washer clean period of washer
control system.
Get the support status of heater control system.
Get the current heater status.
Normally it will be 'auto', it means the heater
device is control by internal algorithm to keep in
a suitable environment; Otherwise is 'trigger', it
means the heater device is force enable to heat
to an internal condition.'trigger' status will be
transfer to 'auto' after reach the internal
condition.
VIVOTEK
285
User's Manual - 425
Advertisement
Table of Contents
