Vivotek FD9167-HT-v2 User Manual page 233

© 2020 VIVOTEK INC. All Right Reserved
NAME VALUE
enablewled <boolean>
<Not
recommended to
use this>
bwmode <boolean>
<Not
recommended to
use this>
sensitivity low,normal,high,1~10
<Not 0
recommended to
use this>
SECURITY DESCRIPTION
(get/set)
6/6 Enable/disable built-in White led
* Only available when "
capability_daynight_c<0~"capability_
nvideoin"-1>_builtinwled > 0".
* We replace this parameter with
"ircutcontrol_illuminators_builtin_whi
teled_enabled" when the version
number (httpversion) is equal or
greater than 0312a.
* We do not support this parameter
when "capability_nvideoin > 1".
* This parameter will not be used
after the version number (httpversion)
is equal or greater than 0400a.
6/6 Switch to B/W in night mode if
enabled.
* Only available when
"capability_daynight_c<0~(n-1)>_
blackwhitemode" is 1.
* We replace this parameter with
"ircutcontrol_c<0~(n-1)>_bwmode"
when the version number
(httpversion) is equal or greater than
0312a.
* We do not support this parameter
when "capability_nvideoin > 1".
* This parameter will not be used
after the version number (httpversion)
is equal or greater than 0400a.
6/6 Sensitivity of day/night control.
There are two value format:
"low,normal,high": if
capability_daynight_c<0~(n-1)>_ircuts
ensitivity_type=options
"1~100": if
capability_daynight_c<0~(n-1)>_ircuts
VIVOTEK
93
User's Manual - 233