Vivotek FD9167-HT-v2 User Manual page 377

© 2020 VIVOTEK INC. All Right Reserved
NAME
speedlink_i<0~4>_c
md
ptzdriver
7.43 UART Control (SD Series)
Group: uart_i<0~(n-1)> n is uart port count
capability_ptzenabled is 0, the bit4 of capability_ptzenabled is 1)
NAME
cameraid
baudrate
databit
paritybit
VALUE
string[40]
0~19,
127 (custom),
128 (no driver)
(capability_nuart > 0 and the bit7 of
VALUE SECURITY
(get/set)
1~255 4/4
2400,4800,9600,19 4/4
200,38400,57600,1
15200
5,6,7,8 4/4
none, 4/4
odd,
even
SECURITY DESCRIPTION
(get/set)
1/4 Additional PTZ command list.
* only available when
capability_camctrl_c0_rs485=2
1/4 The PTZ driver is used by this COM
port.
* only available when
capability_camctrl_c0_rs485=2
DESCRIPTION
Camera ID controlling external PTZ
camera.
Note:
Please set your speed dome to the
appropriate baud rate, and Camera ID,
e.g. 2400bps, camera ID 1,2,3,,,,etc.
All Camera IDs on the same controlling
system (NVR or rs485 keyboard) have to
be distinct.
Therefore, once you send a controlling
signal, each camera will only accept the
inputs with the corresponding ID.
Set baud rate of COM port.
Data bits in a character frame.
For error checking.
VIVOTEK
237
User's Manual - 377