Vivotek FD9167-HT-v2 User Manual page 378

VIVOTEK
© 2020 VIVOTEK INC. All Right Reserved
NAME
stopbit
uartmode
7.44 Lens Configuration
Group: lens for n channel products
n denotes the value of "capability_nvideoin"
(capability_image_c<0~(n-1)>_lensconfiguration_support = 1)
NAME
selected
Group: lens_default
NAME
totalnumbers
Group: lens_user
NAME
totalnumbers
378 - User's Manual
VALUE SECURITY
(get/set)
1,2 4/4
rs485 4/7
VALUE SECURITY
(get/set)
<string> 6/7
VALUE SECURITY
(get/set)
0,<positive 6/7
integer>
VALUE SECURITY
(get/set)
0,<positive 6/7
integer>
DESCRIPTION
"1": One stop bit is transmitted to
indicate the end of a byte.
"2": Two stop bits are transmitted to
indicate the end of a byte.
If you want to transfer the stopbit for
150% of the normal time used to
transfer one bit, the
uart_i<0~(n-1)>_stopbit should be set
as 2 and the uart_i<0~(n-1)>_databit
set as 5 as well.
RS485 mode.
DESCRIPTION
Current selected lens profile.
e.g. lens_selected=lens_default_i0, it
means choosen lens configuration is i0
lens of default group.
DESCRIPTION
Totoal support number of the default
lens profiles
DESCRIPTION
Totoal support number of the user lens
profiles
238