Installation - Hanseatic HGTI6082B14U7709WS User Manual

Recess dimensions
820 mm

Installation

NOTICE
Risk of damage to property!
Selecting the wrong screws can dam-
age the worktop.
■ Only use the supplied screws or screws
of the appropriate length.
• Only install the dishwasher underneath a
continuous worktop which is joined to the
units adjacent to the dishwasher.
• Maintain sufficient distance from the walls
and adjacent appliances. The measure-
ments of the recess must at least corre-
spond to the details in the diagram above.
Installation, connection and initial commissioning
90°
Inlet/outlet area
580 mm
and electrical con-
nection.
600 mm
90°
80 mm
100 mm
Free-standing
1. Switch the fuse off.
2. Remove cardboard, polystyrene and ad-
hesive strips from the inside, if you have
not already done so.
3. Loosen both screws on the reverse side
of the covering panel and remove them.
Page EN-33