Table of Contents
Advertisement
Page 33
Start the xo|one app on your iPad or iPhone.
When you start the app for the first time, you will have to configure the connection to the xo|one.
Normally the app finds the xo|one automatically. In that case tap onto »xo|one« below the header
»DISCOVERED XO|ONE SERVERS« to confirm the device and then tap »Done«.
In case the xo|one is not found automatically, choose »Add your xo|one manually«. First name the
connection, e.g. »xo|one«. Enter under »IP address of your xo|one« either the IP address or »xo-
one.local«. Finally tap onto »Save«.
Ready. Now your xo|one appears in the server list. The antenna symbol indicates if the xo|one is
connected (shown darkly) or if currently no connection can be established (shown lightly).
Advertisement
Table of Contents
