Figure 6-57: Wan Connection Type Wan2; Figure 6-58: Obtain An Ip Wan2 - Linksys RV042 User Manual

10/100 4-Port VPN Router
6. The next screen, Figure 6-57, is for selecting the WAN (or Internet) Connection Type for your WAN2 port when
using it as a WAN (or Internet) port. Select Obtain an IP automatically, Static IP, or PPPoE, depending on which
type is used by your ISP. Click Next to continue. Click Previous if you want to return to the previous screen.
Click Exit if you want to exit the wizard.
7. The next screen that appears depends on your WAN (or Internet) Connection Type selection for your WAN2
port.
If you chose Obtain an IP automatically, Figure 6-58 appears. Select Use DNS Server provided by ISP
(default) or Use the Following DNS Server Addresses, if you want to enter a specific IP. Click Next to
continue. Click Previous if you want to return to the previous screen. Click Exit if you want to exit the wizard.
Chapter 6: Set Up and Configure the Router
Wizard Tab

Figure 6-57: WAN Connection Type WAN2

Figure 6-58: Obtain an IP WAN2

59