Table of Contents
Advertisement
en Favourites
Press the required food.
3.
Press the required dish.
4.
Tip: For some dishes, you can select a preferred
cooking method.
→ "Setting options for the dishes", Page 22
a The settings for the dish appear on the display.
Adjust the settings if required.
5.
You can adjust only certain settings depending on
the dish.
→ "Setting options for the dishes", Page 22
For information about the accessory and shelf posi-
6.
tion, for example, press
Press
to start the operation.
7.
a The appliance starts to heat and the time counts
down.
a No cooking time is displayed in baking sensor
mode. The setting values and how long the appli-
ance has already been in operation are shown on
the display. If the appliance is connected to
Home Connect, the forecast time remaining is dis-
14 Favourites
In the "Favourites", you can save your settings and use
these again.
Note: Depending on the appliance type/software
status, you must first download this function to your ap-
pliance. You can find more information in the
Home Connect app.
14.1 Saving favourites
You can save up to 30 different operating modes as
your favourites.
If you set an operating mode, at the end of the se-
▶
lection list, press
"Save as favourites".
To rename a favourite, you must use the Home Con-
nect app. When your appliance is connected, follow
the instructions in the app.
14.2 Selecting favourites
If you have saved favourites, you can use these to set
the operation.
Press "Favourites" in the menu.
1.
Or select the favourites directly using the
‒
ton.
Press the required favourites.
2.
If required, you can change the settings.
3.
Press
to start the operation.
4.
a The setting values are shown on the display.
24
" Info".
but-
played.
→ "Remaining time forecast for the operation",
Page 23
a Once the dish is ready, a signal sounds. The appli-
ance stops heating.
Once the cooking time has elapsed:
8.
If required, you can select other settings and re-
‒
start the operation.
When the food is ready, use
‒
pliance off.
13.5 Automatic switch-off function
The automatic switch-off function
allows you to bake and fry without any stress.
When the operation has finished, the appliance auto-
matically stops heating.
To achieve an optimum cooking result, remove your
dish from the cooking compartment once the operation
has finished.
Note:
Observe the instructions for the various operating
modes:
¡ → "Steam", Page 17
¡ → "Meat probe", Page 20
14.3 Changing favourites
You can change, sort or delete your saved favourites at
any time.
To sort or rename the favourites, you must use the
1.
Home Connect app. When your appliance is con-
nected, follow the instructions in the app.
To change the setting values on the appliance,
2.
press "Favourites" in the menu.
Or select the favourites directly using the
‒
ton.
Press the required favourites.
3.
At the end of the selection list, press
4.
ite"
Change the setting values.
5.
Confirm the change.
6.
Deleting favourites
To delete a favourite, press "Favourites" in the
1.
menu.
Or select the favourites directly using the
‒
ton.
Press the required favourites.
2.
At the end of the selection list, press "Delete fa-
3.
vourite"
Confirm the deletion.
4.
to switch the ap-
for the dishes
but-
"Edit favour-
but-
Advertisement
Table of Contents
