Version 3.20.390.24 - R&S SMB100A Release Notes

®
R&S SMB100A

1.4 Version 3.20.390.24

Released January 2016
New functionality
Version
151689
138026
Modified functionality
Version
138134
138071
137801
137541
Improvements
Version
141332
138136
138105
137875
137823
Release Notes 1234.5678.02 - 01
Information on the current version and history
Functions
Support of new NRPxS(N) Power Sensors
Support of new frequency options SMB-B140N and SMB-B131
Functions
Calibration value of oscillator can be changed using protection level 2
Improved FM deviation for stereo modulation up to 200 kHz
Sweep will be stopped after modification of the sweeped value e.g. RF frequency
Factory Preset of "RF OFF Mode" depends on the installed hardware features.
Devices with a mechanical step attenuator => "Full Attenuation"
Devices without a mechanical step attenuator => "Unchanged"
Improvements
Step attenuator bouncing with ALC mode S&H at RF output
Pulse Train repetition was not updated after editing
In rare cases a message "Command header too long" was incorrectly displayed
RF output power was not adjusted properly after pulse modulator activation
Repeated settings of the RF phase results in an increased setting time
7