Table of Contents
Advertisement
By following the basic steps on these two pages you will be able to quickly check that your oven is operating
correctly. Please pay particular attention to the guidance on where to install your oven. When unpacking your
oven make sure you remove all accessories and packing. Check to make sure that your oven has not been
damaged during delivery.
Unpack your oven and place it on a flat level surface.
HIGH RACK
(For grill mode)
LOW RACK
(For microwave and
convection mode)
METAL TRAY
20 cm of space on the top and 10 cm at the rear for proper
ventilation. The front of the oven should be at least min. 8 cm/max.
22 cm from the edge of the surface to prevent tipping.
An exhaust outlet is located on bottom or side of the oven. Blocking
the outlet can damage the oven.
STEAMER
STEAM COVER
MODEL :
* THIS OVEN SHOULD NOT BE USED FOR COMMERCIAL
CATERING PURPOSES.
STEAM PLATE
* THIS OVEN CAN BE USED AS BUILT-IN TYPE.
* MUST USE THE BUILT-IN KIT THAT IS MADE BY LG ELECTRONICS.
STEAM WATER
BOWL
(METAL TRAY)
17
Unpacking &
Place the oven in the level location of your choice with
more than 85 cm height but make sure there is at least
MA3882RC / MA3882RCW
Installing
Advertisement
Table of Contents
