EnGenius EWS377-FIT Quick Start Manual page 11

Option C: Standalone Configuration
Step 1: Access to Local Web
1. Use your client device (e.g., a laptop, mobile device, or tablet) to find the SSID: "EnMGMTxxxx" and connect to it. 1)
EnMGMTxxxx - xxxx is the last four digits of MAC - MAC can be found on the device label on the back of the access point.
2. Under your web browser, enter the URL: http://EnGenius.local or http://192.168.1.1 to access the device's user interface.
3. Use the default login credential (ID/PWD: admin/admin) to log in to the device's local web page.
Step2: Configure and Manage the Device
After logging into the device's local web page, navigate to the left side menu to configure and manage the AP accordingly.
How to Change Management Mode?
EnGenius Fit devices support versatile network management methods, but the device can only be managed under one
management mode at a time - either FitXpress, FitController, or Standalone. Therefore, you need to reset the device before
changing to a different management mode. Then follow Quick Start Guide instructions for the device onboarding.
EnGenius Technologies | 1580 Scenic Ave. Costa Mesa, CA 92626
Email: partners@engeniustech.com | Website: engeniustech.com
Version:11/2022
Maximum data rates are based on IEEE 802.11 standards. Actual throughput and range may vary
depending on distance between devices or traffic and bandwidth load in the network.
Features and specifications subject to change without notice. Trademarks and registered
trademarks are the property of their respective owners. For United States of America: Copyright
©2022 EnGenius Technologies, Inc. All rights reserved.