Table of Contents
Advertisement
Playing back/stopping an audio file
1.
Press the AUDIO FUNCTION [1]–[5] button to which
the audio file playback/stop function is assigned.
The button blink, and the audio file plays.
* Audio files shorter than 10 ms might not play correctly.
2.
To stop audio file playback, press the same button
again.
¹ When SW MODE is "Momentary", playback stops once you take
your finger off the button.
¹ If loop playback is off, the Audio file stops automatically when it
has played to the end.
Specifying the playback method
You can make the music file play as a loop, or make it fade-in/out.
Press the [MENU] button Ó "Audio Function" Ó Audio Function 1–5"
Ó select "Audio Player", and set the following menu items.
Menu item
Explanation
Turns loop playback on/off.
Loop
Adjusts the playback volume of the audio file.
Level
Specifies the fade-in time of the audio file.
Fade In
Specifies the fade-out time of the audio file.
Fade Out
Deleting an Audio File
[MENU] button Ó "Import" Ó select "Import Audio File",
1.
and then press the [VALUE/CURSOR] knob.
2.
Select "Audio Memory", and then press the [VALUE/
CURSOR] knob.
3.
Turn the [VALUE/CURSOR] knob to select the memory
number (1–8) of the audio file to delete, and then
press the [VALUE/CURSOR] knob.
The "*" mark is displayed for memories that contain an audio file.
4.
Turn the [VALUE/CURSOR] knob to select "Delete
Audio Memory", and then press the [VALUE/CURSOR]
knob.
A confirmation message appears.
If you want to cancel the operation, select "Cancel".
5.
Turn the [VALUE/CURSOR] knob to select "OK", and then
press the [VALUE/CURSOR] knob.
When the operation is finished, the message "Completed" appears.
6.
Press the [MENU] button to quit the menu.
Audio Operations
33
Advertisement
Table of Contents
