Function Of Remote Controller - LG LM50 Product Data

15.1 Wireless LCD Remote Controller
5
6
4
2
7
11
8
13
14
15
Operation Mode
Healthy Dehumidification Operation
• Cooling Model( ), Heat Pump Model(
76 MPS Variable Multi Split System(50Hz, R410A)
Get user manuals: See SafeManuals.com

15. Function of Remote Controller

Signal transmitter
10
CANCEL
ON OFF SET
17
AUTO CLEAN
18
12
16
Flip-up door
(opened)
Cooling Operation
Auto Operation
Heating Operation
START/STOP BUTTON
1
Operation starts when this button is pressed and
stops when the button is pressed again.
OPERATION MODE SELECTION BUTTON
2
Used to select the operation mode.
ROOM TEMPERATURE SETTING BUTTONS
3
Used to select the room temperature.
INDOOR FAN SPEED SELECTOR
4
Used to select fan speed in four steps
low, medium, high and CHAOS.
JET COOL
5
Used to start or stop the speed
cooling. (Speed cooling operates
1
super high fan speed in cooling mode.)
CHAOS SWING BUTTON
6
Used to stop or start louver movement and set
3
the desired up/down airflow direction.
ON/OFF TIMER BUTTONS
7
Used to set the time of starting and stopping
operation.
TIME SETTING BUTTONS
8
9
Used to adjust the time.
TIMER SET/CANCEL BUTTON
9
Used to set the timer when the desired time is
obtained and to cancel the Timer operation.
SLEEP MODE AUTO BUTTON
10
Used to set Sleep Mode Auto operation.
AIR CIRCULATION BUTTON
11
Used to circulate the room air without cooling or
heating.
ROOM TEMPERATURE CHECKING BUTTON
12
Used to check the room temperature.
PLASMA(OPTIONAL)
13
Used to start or stop the plasma-purification func-
tion.
HORIZONTAL AIRFLOW DIRECTION
14
CONTROL BUTTON (NOT ON ALL MODELS)
Used to set the desired horizontal airflow direc-
tion.
RESET BUTTON
15
Used prior to resetting time or after replacing bat-
teries.
2nd F Button
16
Used prior to using modes printed in blue at the
bottom of buttons.
AUTO CLEAN
17
Used to set Auto Clean mode.
)
LED LUMINOSITY
18
Used to adjust LED luminosity.