Table of Contents
Advertisement
When malfunctions happen, the LED screen will display the following error codes as a reminder.
Code
Possible Cause
Top Cover is not inserted
E02
or is inserted incorrectly.
E05
Motor Overheated
Motor Super-overheated
E06
The dough is too dry / there is
E09
other matter in the mixing bowl
E14
Capacity Overload
There is other extraneous matter
in the mixing bowl or in the
E15
extrusion path.
The dough condition is not
E16
good enough for extrusion
The machine is not leveled to
E17
activate the scale
If the problems cannot be solved with the indicated measures above, please contact our support
team.
DO NOT ATTEMPT TO REPAIR THE MACHINE WITHOUT A QUALIFIED GUIDE.
Error Codes
Check that the top cover is properly inserted.
The machine works for a long time to generate
heat energy.
Please stop the process and let the engine cool
for a few hours then restart.
This would also be displayed after E05 has
occurred too many times. You may need to
improve the dough condition as indicated
on page 17.
Please stop the process and let the engine cool
for a few hours then restart.
Check the mixing bowl if there is any other
extraneous matter and improve the dough
condition as indicated on page 17.
Then you can restart the process right away.
The maximum capacity of the mixing bowl
is 600g of flour at one time.
Check the mixing bowl if there is any extraneous
matter to be removed, and then you may feel free
to restart the process right away.
Follow the instructions on page 17 to improve
the dough condition.
Then you may feel free to restart the process
right away.
Remove all the flour/dough and disassemble all
parts. Make sure that the machine is on a level
and stable countertop. Re-assemble all parts and
retry the scale.
22
Answer/Solution
Advertisement
Table of Contents
