Table of Contents
Advertisement
DO NOT REMOVE ANY PARTS OF THE MACHINE UNTIL AFTER THE PROCESS IS FINISHED AND THE
MACHINE IS UNPLUGGED.
1. Remove the top cover by spinning counterclockwise and lifting it up.
2. Lift the mixing paddle and remove.
3. Unscrew the disc locking nut in a counterclockwise direction.
4. Pull the extruding head out and remove the locking disc from the extruding head.
5. Pull the extruding axle out from the mixing bowl.
6. Remove the mixing bowl from the machine body.
Disassembly Instructions
13
Advertisement
Table of Contents
