Table of Contents
Advertisement
Turn off the machine and unplug from the power socket. Wait at least 60-90 minutes to make
sure the machine is totally cooled down.
Do not immerse the machine Body in water.
Do not use a scouring pad, caustic cleaners, or abrasive cleaners (for example, gasoline, alcohol,
and propanol) to clean the appliance.
Clean the appliance each time after use, in case the appliance can't operate properly next time.
The shaping discs and all detachable parts of the appliance are dishwasher-safe, just make sure
the selected dishwasher program is no higher than 140°F (60°C).
b. gasket
d
d
Cleaning
1. Disassemble all parts of the machine as
described on page 12 and let the dough dry.
2. Use a brush to remove the dough residues from
the bowl. Pull out the two gaskets (a. The bottom of
a. gasket
the mixing bowl, b. The end of the mixing bowl) for
a thorough cleaning.
c
3. Use a dry cloth and the Brush to remove leftover
dough on the Mixing paddle, especially the grooves (c),
in the gears (d), and in the corners of the parts.
4. Use the awl (please be aware of the sharpness) of
the brush to clean the holes of the discs where there
is dough residue.
19
Advertisement
Table of Contents
