Switching The Display Indicator; Using The Light On/Off Function - Philips KJ550F-D21 User Manual

Sleep Mode

Switching the display indicator

Note: The PM2�5 level is displayed on the central of the screen by default�
1
PM2.5
IAI Gas
2
1
Touch the button once to switch the display indicator�
2
Touch and hold the
level�

Using the light on/off function

PM2.5
IAI Gas
2
With the light sensor, the control panel can automatically turn on, turn off or dim according to
the ambient light� The control panel will be off or dim when the ambient light is dark� You can
touch any button to wake up all lights� Then, if no further operation, all lights will be off or
dim again to match with the ambient light�
You can touch the light on/off button
Touch any button to wake up all lights�
EN
30
Sleep mode (
In Sleep mode, the air disinfector operates quietly at a low
speed� After 3 seconds, the screen lights off�
2
Particulate
Matter 2.5
3s
button for 3 seconds to check the explaination of PM2�5/Gas/ IAI
manually to turn off all lights and the control panel�
)