Cleaning, Maintenance And Ordering Spare Parts; Disposal And Recycling - EINHELL AQUINNA 18/30 F LED Original Operating Instructions

7. Cleaning, maintenance and
ordering spare parts
The equipment almost completely maintenance
free. In order to ensure a long service life,
however, we recommend regular checks and
product care.
Danger!
Always remove the batteries before starting any
cleaning work.
7.1 Maintenance
•
If the equipment becomes clogged, connect
the discharge line to the water line and dis-
connect the intake line. Open the water line.
Switch on the equipment several times for
approx. two seconds. This should resolve the
majority of clog-related problems.
•
There are no other parts inside the equipment
which require maintenance.
7.2 Cleaning the coarse fi lter insert
•
Clean the coarse filter insert at regular inter-
vals, and replace it if necessary.
•
Remove the coarse filter cap (3) and the
coarse filter (10) (Fig. 2).
•
Clean the coarse filter by tapping it on a flat
surface.
•
Wash the coarse filter under flowing, clear
water.
•
In cases of stubborn dirt, first wash with
soapy water, then rinse with clear water and
leave to dry in the air.
•
Do not use abrasive cleaning agents or petrol
to clean the coarse filter.
•
Assemble in reverse order.
7.3 Ordering replacement parts:
Please quote the following data when ordering
replacement parts:
•
Type of machine
•
Article number of the machine
•
Identification number of the machine
•
Replacement part number of the part required
For our latest prices and information please go to
www.Einhell-Service.com
Anl_AQUINNA_18_30_F_LED_SPK13.indb 22 Anl_AQUINNA_18_30_F_LED_SPK13.indb 22
GB

8. Disposal and recycling

The equipment is supplied in packaging to
prevent it from being damaged in transit. The
raw materials in this packaging can be reused or
recycled. The equipment and its accessories are
made of various types of material, such as metal
and plastic. Never place defective equipment in
your household refuse. The equipment should
be taken to a suitable collection center for proper
disposal. If you do not know the whereabouts of
such a collection point, you should ask in your
local council offi ces.
9. Storage
•
Store the equipment and its accessories in
a dark and dry place at above freezing tem-
perature. The ideal storage temperature is
between 5 and 30 °C. Store the equipment in
its original packaging.
•
Before lengthy periods of inactivity or winter
storage rinse the pump thoroughly, empty it
completely and store it in a dry place.
•
The unit must be completely drained before it
is subjected to frost.
•
After relatively long periods of storage, switch
on and off briefly to check whether the rotor is
turning properly.
- 22 -
13.10.2022 14:52:16 13.10.2022 14:52:16