Uninstalling Printer Software; Power Supply - Lexmark Color Jetprinter Z12 User Manual

Steps to basic printing
Maintaining your printer
Troubleshooting
Appendix
Index
Using the World Wide Web
If your computer does not have a
CD-ROM drive, you can download
the printer software from the World
Wide Web at www.lexmark.com.
Note: Before you begin, make sure
Stuffit Expander is loaded on your
system.
1 From Lexmark's Web site, select
the appropriate driver for your
operating system.
2 Double-click the binhex (.hqx)
file to open it.
3 Follow the instructions on your
screen.
Uninstalling printer
software
If your printer software does not
install properly, you may need to
uninstall and then reinstall it.
To uninstall the printer software:
1 Drag the printer icon to the trash
can on the desktop.
2 Insert the software CD.
The Lexmark Z12 software
installation screen appears.
3 Click Install and Agree.
4 From the Easy Install pop-up
menu, choose Uninstall.
5 Select Complete Uninstall.
6 Click Uninstall.
To reinstall the printer software,
follow the appropriate set of
instructions from "Installing printer
software" on page 57.

Power supply

If your power supply fails, replace it
with the Lexmark replacement part
or other UL LISTED Direct Plug-In
Power Unit marked "Class 2" and
rated 30 V dc at 500mA.
58
Appendix
Safety
• If your product is NOT marked
with this symbol , it MUST be
connected to an electrical outlet
that is properly grounded.
• The power cord must be
connected to an electrical outlet
that is near the product and
easily accessible.
• Refer service or repairs, other
than those described in the
operating instructions, to a
professional service person.
• This product is designed, tested
and approved to meet strict
global safety standards with the
use of specific Lexmark
components. The safety
features of some parts may not
always be obvious. Lexmark is
not responsible for the use of
other replacement parts.